• 0
  • 0

Introduction to Titanium Carbide TiC Powder

An Introduction Titanium Carbide TiC Powder

Titanium carbide or TiC is a typical transition metal carbide with NaCl-type cubic structure. It has a high melting point, high hardness and high Young's molecular, high Chemical stability, Wear resistance and corrosion resistance, and good thermal and electrical conductivity. This means it can be used in many applications and excellent potential for cutting tools as well as aerospace components, protective coatings against wear, foams, and infrared radiation ceramics materials.

Application of Titanium Carbide TiC Powder

1. The multiphase materials are used to make different materials

Titanium carbide Ceramics are part of the super-hard tooling materials TiC and TiN, WC, A12O, and other raw materials composed of various multiphase ceramic materials These materials have a extremely high melting points, high hardness with excellent chemical stability. is the best material for cutting tools, wear-resistant products and also they offer excellent electrical conductivity, is the preferred material for electrodes.

Cutting tool material. Because of a percentage of TiC hard particle dispersion in the matrix, the composite cutting tools not only improve the toughness and strength, but also to some extent, enhance the toughness of the fractures than the raw tool's cutting. This can be a big improvement. A12o3-tic-tic-system ceramics can be used as armor materials. In the role of a tooling material the hardness is greater than (C, N), and Ti(C N, C) because of N to make it on steel and other cutting materials the friction coefficient much lower. There are many advantages of cutting. By combining the advantages of Ti and (C, N) to form Multiphase Ceramics (MPC), a promising tools material can also be prepared.

2. Useful as coating materials

Diamond coating: This production process for diamond tools follows typically the impregnation of powder metal using the method. Because of the high interfacial energy of diamond and general metal or alloy, it is not able to be penetrated by alloys or metals with a melting point of low, and its bond performance is poor. In recent years, a lot of scientists have conducted a large amount of work on improving the bond strength between diamond and metal matrix. The method of active metal is the most widely used technique, which involves adding the tiny amount of titanium to metal bond, vanadium, chromium, and other active metal, tool for liquid phase sintering that is active. It is high carbon compounds , which form elements, and the affinity for diamonds is high, which enables increase the surface of the diamond that allows for the metallurgical connection of diamond and metal bond. The strength of the bond is affected by the amount of active metal, sintering temperature and duration as well as other variables, and it requires to dissolve the binder to make it possible to enrich the active metal to the interface as this technique is not appropriate for hot pressing sintering of diamond and metal powder with a quick time solid phase.

3. For preparing foam ceramics

As a filtering device, foam ceramics remove inclusions throughout all types of fluids and their filtration method is the agitation and adsorption. The filter must have the chemical solidity of the substance, particularly in the metalurgical industry using a high melting filter, so this kind of material can be used to remove oxide most of the time, however, it can also be adapted to the filter of the metal melt, the most important goal and goal of thermal shock resistivity. Titanium carbide foam clays have superior strength, harderness, electrical conductivity and heat, in addition to corrosion resistance and heat than oxide foam ceramics.

4. Infrared radiation ceramics are used in materials

Titanium Carbide is a form of intermetallic compound. It has typically had good chemical stability and without a change in the state of valence and, when the system is subject to high-temperature reduction of the process of making samples, parts of titanium ions display a delay phenomena that appear, with the intention of the solid of titanium ions melting into the structure of cordierite structural position, change of the structure. When compared to one material, the radiation performance of the titanium carbide near 3tma level is evidently improved, which is beneficial for the use in the field of high temperature.

Main Distributor of Titanium Carbide TiC Powder

We are a respected chemical material supplier in the world and a manufacturer with over 12-year-experience in manufacturing high-end chemicals and Nanomaterials. They include silicon graphite powder, zinc sulfide, calcium tritium, 3D-printing powder such as.

If you are looking for the highest-quality titanium carbide TiC powder Feel free to call us or send us an inquiry. (

Inquiry us

  • tags

Our Latest News

Introduction of aquariums and market analysis in 2022

The aquarium is a place for aquatic life display and popular science education, as well as a place for aquatic life resource protection and scientific research. Aquariums can specialize in marine life, freshwater life, or both; there are public aquar…

The Global Silicon Metal Market introduction and c64200 silicon aluminum bronze supplier

The Global Silicon Metal Market Generally, there are two different types of silicon metals. One is called the Chemical grade and the other is called the Metallurgical grade. These t…

Introduction to c64200 silicon aluminum bronze Additives

Introduction to c64200 silicon aluminum bronze Additives Whet…