MOS2 Molybdenum Disulfide Dry Film LubricantOn Dec 15,2023 by admin
MOS2 molybdenum disulfide dry filmÂ lubricantÂ is a standard functional coating widely used in various industries. This article will discuss the application fields and advantages of MOS2 molybdenum disulfide dry film coating, as well as its importance in industry and technology.
Application fields of MOS2 molybdenum disulfide dry film coating
MOS2 molybdenum disulfide dry film coating has excellent lubrication properties and can effectively reduce friction coefficient and wear.
Therefore, it is widely used in lubricants for various mechanical equipment, such as engines, transmission systems and bearings. This not only extends the service life of the equipment but also improves work efficiency.
- Anti-corrosion coating
MOS2 molybdenum disulfide dry film coating has good anti-corrosion properties and can effectively prevent metal materials from oxidation and corrosion. Therefore, it is widely used in automotive, construction, aviation and other fields to protect the surface of metal materials.
- Electronic devices
MOS2 molybdenum disulfide dry film coating has good electrical conductivity and thermal stability, so it is used as a protective layer for electronic devices. It improves electronic devices’ performance and reliability while reducing energy losses.
- Solar cells
MOS2 molybdenum disulfide dry film coating plays a crucial role in solar cells. It can improve the light absorption capacity and photoelectric conversion efficiency of solar cells, thereby improving their power generation efficiency.
Advantages of MOS2 molybdenum disulfide dry film coating
- Low friction coefficient
MOS2 molybdenum disulfide dry film coating has a low friction coefficient, which can effectively reduce the energy loss and wear of mechanical equipment. This not only extends the service life of the equipment but also improves work efficiency.
- Good corrosion resistance
MOS2 molybdenum disulfide dry film coating has good corrosion resistance and can effectively prevent metal materials from oxidation and corrosion. This makes it an ideal anti-corrosion coating material.
- Excellent electrical conductivity
MOS2 molybdenum disulfide dry film coating has excellent electrical conductivity and can improve the performance and reliability of electronic devices. It can also reduce energy losses and increase the efficiency of electronic devices.
- High thermal stability
MOS2 molybdenum disulfide dry film coating has high thermal stability and can maintain its performance and stability in high temperature environments.
How to choose between graphite and molybdenum disulfide for a specific lubrication application?
Graphite or molybdenum disulfide dry film lubricants are often used in operations where mechanical operating conditions are extreme, such as high shaft speeds and ultra-low speed rotating or sliding machinery, extreme temperatures and pressures, difficult-to-access lubricated surfaces, and many industrial applications. In the discussion below, we provide some background on the differences and reasons for choosing one over the other.
Other dry film lubricants, such as Teflon or polytetrafluoroethylene (PTFE), are the leading alternatives to molybdenum disulfide and graphite. PTFE lubricants are also widely used. Their main properties are inertness and non-conductivity. Disadvantages include the release of slightly toxic fumes when overheated. Additionally, its wear resistance is not very good and may be more expensive, and it melts when used at temperatures above 326Â°C. This discussion assumes that you need a lubricant similar to graphite or molybdenum disulfide and need more information to decide which one to use.
Reduce friction between surfaces
Graphite and molybdenum are solid materials used in dry film lubricants to reduce friction between surfaces. Each material has different properties and, therefore, offers advantages in specific applications. They often have a lattice structure, which is described as plates sliding against each other. They have excellent load-carrying capabilities in either sliding or rolling mode. It can be applied by a brush or aerosol spray. They can be used alone or added to other oil-based lubricants and even metals such as lead and copper for precise lubrication performance.
Molybdenum disulfide inhibits corrosion of stainless steel and has slightly better wear resistance.
Molybdenum disulfide is mined from granite and refined to achieve the high purity of lubricants. Molybdenum disulfide is an excellent lubricant for high vacuum and ultra-high vacuum applications where graphite may need to entrain water vapor.
Molybdenum disulfide is temperature-resistant only up to 400Â°C, above which it begins to oxidize.
Molybdenum disulfide usually has a lower coefficient of friction than graphite, but this is only sometimes the case and the difference, if any, is not significant. One of the best properties of molybdenum disulfide is its ability to inhibit corrosion when used as a coating on stainless steel. In addition, molybdenum disulfide has better wear resistance, especially in extreme-pressure environments.
Graphite can withstand high temperatures of 787Â°C as a lubricant, and as an anti-seize agent, it can withstand high temperatures of 1315Â°C.
Graphite dates back to very early times, probably being used in pencils in the mid-1500s. It is a soft crystalline carbon with excellent sliding lubrication properties. It is gray-black, opaque, has a metallic luster, and is flexible but inelastic. It has some properties of metals and some properties of non-metals. Like most metals, it conducts electricity and is a good conductor of heat. It is also inert as a non-metal.
Graphite provides excellent lubrication at temperatures up to 787Â°C in the presence of water vapor. It is used as an anti-seize compound at temperatures up to 1315Â°C, and the oxidation product produced is carbon dioxide. Because graphite requires water vapor for its lubricity, it is not used in high vacuum environments, including deep space use.
Graphite and molybdenum disulfide are excellent dry film lubricants with very similar properties in many applications. Graphite is a better choice for extremely high temperature applications. Molybdenum disulfide has better corrosion resistance when used on stainless steel surfaces. If wear resistance under high pressure is considered, molybdenum disulfide also has slight advantages.
TRUNNANOÂ is a supplier of molybdenum disulfideÂ powderÂ with over 12 years experience in nano-building energy conservation and nanotechnology development. It accepts payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you are looking for high quality molybdenum disulfideÂ powder, please feel free to contact us and send an inquiry.